If you’re planning a tiling project, you’ve probably come across the debate: tile backer board vs drywall. As a handyman who’s tackled countless renovation projects, let me break down the pros, cons, and key differences to help you make the right choice for your space. Trust me, understanding this can save you from future headaches—and possibly costly repairs.
Key takeaways:
- Tile backer board is essential in wet areas like bathrooms and kitchens due to its moisture resistance and durability.
- Drywall is suitable for dry areas, offering a lightweight, budget-friendly option for tiling.
- Tile backer board provides a stable, water-resistant foundation, while drywall requires proper sealing to prevent damage.
- Choosing the right material based on location ensures long-lasting results and prevents costly repairs.
What Are Tile Backer Boards and Drywall?
First, let’s get clear on what we’re comparing.
- Drywall: Also known as gypsum board or sheetrock, drywall is a common material for walls and ceilings in most homes. It’s made of gypsum sandwiched between layers of paper. It’s lightweight, easy to install, and inexpensive. However, it’s not inherently water-resistant.
- Tile Backer Board: Backer board (such as cement board or fiber cement board) is specifically designed to provide a stable and moisture-resistant base for tiles. Unlike drywall, backer board is made of cement and fiberglass mesh or similar materials. It’s heavier and more robust but also more expensive and challenging to work with.
Where to Use Each Material
The biggest factor when deciding between drywall and backer board is location. Let’s break it down:
1. Bathrooms and Kitchens
In wet areas like bathrooms, kitchens, or anywhere near water sources, you absolutely need a moisture-resistant material. Tile backer board is the winner here. Why? Drywall, even moisture-resistant varieties like green board, can’t handle consistent exposure to water. Over time, it’ll break down and grow mold.
Backer boards like HardieBacker or Durock are designed to stay intact even when exposed to moisture. If you’re tiling a shower, bathtub surround, or backsplash, don’t cut corners—go with backer board.
2. Dry Areas
For areas where water isn’t a concern, regular drywall is perfectly fine under tiles. Think about a feature wall in your living room or a backsplash behind your desk. Drywall is lighter, easier to install, and more affordable. But remember, it’s still important to seal the tiles properly to prevent any issues down the line.
Key Differences Between Tile Backer Board and Drywall
Let’s dive deeper into how these materials compare in different aspects:
1. Moisture Resistance
- Drywall: Basic drywall will absorb water and degrade quickly. Even moisture-resistant drywall is only designed to withstand limited humidity, not direct water exposure.
- Tile Backer Board: Cement-based backer boards are virtually unaffected by water. Some, like Kerdi Board, are even waterproof out of the box.
2. Durability
- Drywall: Not as strong or impact-resistant. Tiles can pull off if the adhesive fails or the wall flexes.
- Tile Backer Board: Rigid and robust, offering a stable base for heavy tiles or long-term use.
3. Ease of Installation
- Drywall: Lightweight and easy to cut with a utility knife. You can hang it on your own with some practice.
- Tile Backer Board: Heavier and harder to cut. You’ll need special tools, like a carbide-tipped scoring knife or a power saw. Installing it can also be more labor-intensive.
4. Cost
- Drywall: Budget-friendly, typically costing around $12 to $15 for a 4×8-foot sheet.
- Tile Backer Board: More expensive, ranging from $15 to $30 for a 3×5-foot sheet. Plus, you’ll need screws, tape, and possibly waterproofing materials.
5. Weight
- Drywall: Lightweight and easy to maneuver.
- Tile Backer Board: Much heavier. You’ll need help lifting and installing it, especially for large projects.
6. Fire Resistance
- Drywall: Regular drywall has some fire-resistant properties, and Type X drywall is specifically fire-rated.
- Tile Backer Board: Cement-based boards are non-combustible, making them a solid choice for areas near heat sources, like a fireplace.
Installation Tips for Each Material
Drywall:
- Make sure the framing is properly spaced (usually 16 inches on center).
- Use drywall screws to secure it to the studs.
- If tiling over drywall, apply a quality primer to prevent the adhesive from softening the paper face.
Tile Backer Board:
- Use corrosion-resistant screws and alkali-resistant tape for seams.
- Install a waterproof membrane (like RedGard) over the backer board in wet areas. Even though the board is water-resistant, this extra step adds a layer of protection.
- Leave a small gap between the board and the tub or shower base, and seal it with silicone caulk to prevent water wicking.
Common Mistakes to Avoid
- Using Regular Drywall in Wet Areas: This is a recipe for disaster. It might hold up for a little while, but eventually, water will find a way in.
- Skipping the Waterproof Membrane: Even if you’re using a tile backer board, adding a waterproofing layer is crucial in wet areas.
- Improper Fastening: Not using enough screws or the wrong type can cause tiles to crack or pull away over time.
- Skipping the Sealing Step: Always seal gaps and seams to prevent water infiltration.
Tile backer board vs drywall FAQs
Can I use drywall instead of tile backer board in a bathroom?
No, regular drywall is not suitable for wet areas as it absorbs moisture and can deteriorate over time.
Is tile backer board waterproof?
While tile backer board is moisture-resistant, it often requires an additional waterproofing layer in wet areas for extra protection.
Which is more affordable: tile backer board or drywall?
Drywall is more budget-friendly, but tile backer board offers better durability and moisture resistance, making it ideal for wet environments.
Can I tile directly over drywall?
Yes, you can tile over drywall in dry areas, but ensure it is properly sealed to prevent adhesive from softening the paper face.
My Recommendation
If you’re tiling in a wet area, always choose tile backer board. It’s worth the extra effort and cost for the peace of mind it provides. For dry areas, drywall is a perfectly acceptable option as long as it’s properly prepped and sealed.
Remember, the key to a successful tiling project is a stable, moisture-resistant foundation. Cutting corners on materials might save you money upfront, but it can lead to expensive repairs down the line. So, plan carefully, follow best practices, and you’ll end up with a tiled surface that looks great and lasts for years.
If you’ve got questions or need more tips, feel free to ask. Happy tiling!