Most likely, as a homeowner, you’ll experience a piping issue more than once in your lifetime. Failure to address the situation at the right time may lead to costly issues, such as complete pipe replacement, disease-infested environment, and more.
For many years, homeowners have been using traditional repair processes to rectify piping issues. Although these could rectify such issues, there’s a need to introduce a more efficient method to address plumbing emergencies. Technological advancements contributed to developing more efficient solutions, such as CIPP lining over the last few years.
The said solution has become a popular method amongst homeowners due to its efficiency. However, choosing the right CIPP lining solution can be overwhelming, especially when you don’t have the necessary know-how. For this reason, it’s important to conduct extensive research to ensure you identify top CIPP liners manufacturer in your locality. Thus, it’ll be easier to choose a reputable service provider to provide quality materials and skills.
The following article discusses what you need to know about CIPP lining. You’ll learn what CIPP liner is, why it’s an appropriate solution for your project, its limitations, and more.
What’s A CIPP Liner?
Cured-in-place pipe (CIPP) lining refers to rehabilitating pipes in a trenchless process, aimed at repairing and restoring existing piping systems by using liquid resin and a textile liner tube. As the name suggests, the solution will cure the problem in existing piping systems, reducing the need for a total overhaul of replacing the pipes.
How Does It Work?
As mentioned above, CIPP lining is a trenchless process of pipe restoration. Thus, there’ll be no need for major excavation to access your piping system.
Technicians begin the CIPP lining installation process by cleaning out your pipes. Trying to install the lining in dirty pipes will lead to poor results, and you may end up losing your whole investment. Removing dirt and other debris will ensure even distribution of resin coating, providing the cure.
Once the pipes have been cleaned, the service providers insert an analysis device to identify the damaged sections. This information plays a huge role as the technicians will use it to determine which areas need repairs.
The technician will then use a tube to insert layers of repair materials into the pipe. A balloon or bladder is put inside the tube line to keep the tube in place against the pipe until it cures. Depending on the repair materials used, it’ll take around two to three hours to cure a pipe. The technician will deflate the balloon and insert an analysis device to check whether the curing method was a success.
Why Should You Consider CIPP Lining For Your Project?
You might be wondering whether CIPP lining is an appropriate solution for your project. The following are reasons why you should consider using CIPP lining to repair and restore your piping system:
1. Saves Time And Effort
Unlike traditional repair processes, which might require you to dig deep trenches to access the pipes, CIPP lining is a trenchless process that doesn’t require major excavation work. This will save you a considerable amount of time and effort. As mentioned above, the inserted lining materials will address the issue, restoring your existing piping system without the need for a total overhaul.
It’s important to understand that the more time you spend repairing your piping, the higher cost you’ll incur. Thus, using CIPP lining will save you a considerable amount of money, improving your profit margin. Also, you should understand that a typical repair disturbance might cost you more money if you have the repair done in your place of business. Hence, a CIPP lining will ensure you finish your project early enough, saving you some bucks.
2. Minimizes Yard Damage
Your yard will improve the outdoor areas of your property and can play a huge role in increasing its resale value. Thus, it’s important to ensure you protect your yard at all costs.
As mentioned above, no major excavation work is required in CIPP lining. On the one hand, using a traditional repair process will require you to dig deep trenches, affecting the appearance of your yard. Also, you may be forced to incur extra costs in landscaping projects to restore your yard.
3. Improves Safety
Your safety should be one of your top considerations when you’re repairing your piping system. Since CIPP lining is done completely underground, it minimizes major excavation and pipe digging risks.
On the other hand, traditional repair processes may expose you and your team members to asbestos, mold, and other harmful natural compounds. This will increase your chances of contracting diseases, increasing your monthly medical bills. Also, major excavation may collapse, causing injury to you or your workforce.
4. Provides Long-Lasting Solution
It’s the dream of most homeowners to have an investment that serves them for the longest time possible. While replacing your entire piping system will last for decades, CIPP lining provides a cheaper alternative, yielding the same long-lasting results.
When you properly install your pipeliner, you’ll have a new jointless pipe replacing the old and damaged ones. Your new pipe will be resistant to corrosion, rust, or any other type of issue associated with other types of pipes. Thus, you’ll have peace of mind, knowing that you won’t repair or replace your piping for a longer time, giving the value of your money.
How To Choose The Right CCIP Liner For Your Project
Choosing the right pipeliner will play a huge role in ensuring the success of your project. There are several factors you can consider when choosing your CCIP liner. They include:
1. Budget
Each manufacturer delivers a different pipeliner, each with a different pricing range. Thus, it’s crucial to visit more than one vendor to understand the average price of CIPP liner in your locality. Hence, you’ll get high-quality products at an affordable price, ensuring the success of your project.
2. Consider The Manufacturer’s Credibility
Before choosing any pipeliner, it’s important to consider their reputation. Go through the provided testimonials to gauge whether the manufacturer will meet your needs and expectations. Ensure they also comply with the set rules and regulations, ensuring that you’ll receive quality and safe services.
Bottom Line
As discussed above, a CIPP liner might be an ideal repair solution for your piping issues. Conduct extensive research to identify whether or not the repair solution is appropriate for your project, to avoid losing your whole investment.